Page 1 of 1
NEW PROJECT.
Posted: Mon Jun 30, 2003 1:49 pm
by OVERKILL ENG
After taking the rover out on the weekend and braking both diffs climbing pebbles I have decided to piss it off and build a long wheelbase Zook.If anyone knows of a cheap long wheel base ZOOK that is rego'd and close to standard let me know.
Posted: Mon Jun 30, 2003 3:09 pm
by Dozoor
There a bit under developed around there , what did you actually break sam.?
Posted: Mon Jun 30, 2003 3:58 pm
by OVERKILL ENG
Larry it broke the drivers side axle/cv and bits of the rear ring gear came out through the rear housing.
SAM
Posted: Mon Jun 30, 2003 4:20 pm
by redzook
cool so u gunna keep this one registered?
Posted: Mon Jun 30, 2003 4:31 pm
by OVERKILL ENG
Yes this one will be registered and full bodied well sortof.
SAM
Posted: Mon Jun 30, 2003 5:31 pm
by antt
can't wait to see this thing
Posted: Mon Jun 30, 2003 6:43 pm
by Midget
Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???
Jamie
Posted: Mon Jun 30, 2003 8:43 pm
by Maggot4x4
Posted: Mon Jun 30, 2003 8:58 pm
by suzidisco
What are you looking for in a cheap LWB suki as i am selling mine soon to pay for the maxi axles and 110 cvs.
were you running 110 cv or standards cv
Posted: Mon Jun 30, 2003 11:54 pm
by moose
give Joe a ring at
4PLAY OFFROAD
he still has 1 for sale !!!!
03 97614694
Posted: Tue Jul 01, 2003 1:51 pm
by OVERKILL ENG
suzidisco wrote:What are you looking for in a cheap LWB suki as i am selling mine soon to pay for the maxi axles and 110 cvs.
were you running 110 cv or standards cv
I'll be honest as cheap as possible Am looking at about $2000.
The closer to standard the better.
I was running all standard shit in the Rangie so I knew it was going to break but I didn't expect them to break that easy.
SAM
Posted: Tue Jul 01, 2003 1:53 pm
by redzook
what are the plans for it????
Posted: Tue Jul 01, 2003 1:56 pm
by OVERKILL ENG
Fourwheelin wrote:Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???
Jamie
This one will be my daily driver that I can drive anywhere to go 4 wheeling.
Specs:
Bobbed tray and canopy.
spring over high steer
35 mtr
1.3 injected and turboed.
Series 1 gearing.
tube front bar
tube rear bar.
Trailtough flares.
I want to use in a few winch events as well so it will have a high mount.
Diffs I am undecided yet maybe the same as the buggy if not heavily braced widetrack diffs.
SAM
Posted: Tue Jul 01, 2003 2:02 pm
by Dozoor
ouchyyy, 400ft/lb xthe thingo multiply be tha watso minus 15% Just for the sake of it ,= carnage
Posted: Mon Jun 30, 2003 3:58 pm
--------------------------------------------------------------------------------
Larry it broke the drivers side axle/cv and bits of the rear ring gear came out through the rear housing.
SAM
Bummer sam.
Posted: Fri Jul 04, 2003 9:50 pm
by Midget
overkill wrote:Fourwheelin wrote:Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???
Jamie
This one will be my daily driver that I can drive anywhere to go 4 wheeling.
Specs:
Bobbed tray and canopy.
spring over high steer
35 mtr
1.3 injected and turboed.
Series 1 gearing.
tube front bar
tube rear bar.
Trailtough flares.
I want to use in a few winch events as well so it will have a high mount.
Diffs I am undecided yet maybe the same as the buggy if not heavily braced widetrack diffs.
SAM
Sam
Sounds like it will be a very fun daily driver.
How much boost will you run?????
Jamie
Posted: Thu Jul 10, 2003 10:59 pm
by dave
If i get my way he run lots.
If were going to do winch challanges its got to somke those 35's.
Re: NEW PROJECT.
Posted: Mon Jul 14, 2003 10:56 pm
by Beastmavster
overkill wrote:After taking the rover out on the weekend and braking both diffs climbing pebbles I have decided to piss it off and build a long wheelbase Zook.If anyone knows of a cheap long wheel base ZOOK that is rego'd and close to standard let me know.
Cmon build a long wheelbase Vitara with ute conversion, twin transfer cases, SAS swap and 38" rubber you know you want to.
Posted: Tue Jul 15, 2003 7:43 am
by bj on roids
so you wanna sell the rover? how much? wanna be dirt cheap with two busted diffs in it.
