Outer Limits 4x4 Board

Hi All,

Have a 4" Suspension lift and want 35"s. Question is body lift, I've been told a 1" or 30mm would be easy and effective to fit.

Has anybody fitted a 1" body lift with 4" coils and ran 35"s?
How did you go?
What mods are for a 1" lift i.e. shifters, lines etc.


Thanks

mattscib_GQ wrote:Have a 4" Suspension lift and want 35"s. Question is body lift, I've been told a 1" or 30mm would be easy and effective to fit.

Has anybody fitted a 1" body lift with 4" coils and ran 35"s?
How did you go?
What mods are for a 1" lift i.e. shifters, lines etc.


Thanks

4inch lift you can run 35s. they will hit on inner guards (as they do with 6in lift), and you will have to trim your guards, and lose the mudflaps, but this is covered in the bible.

as for the 1inch body lift, while your at it, go 2inch -lot of work for little gain.
o mods really to sticks or brakes for 1inch, just the usual bending of the brake brackets.

2in, longer brake lines, etc.

Any idea how much needs to be trimmed off the guards?

mattscib_GQ wrote:Any idea how much needs to be trimmed off the guards?

have a look and a bit of a search, there are a few threads on it, I think Cheezys site actually has some photos too.