Page 1 of 1
Landcruiser 60 Series diff ratio options
Posted: Thu Aug 25, 2005 6:45 pm
by -Richo-
Just wondering what diff ratios are available for 60 series housings, and can other model cruiser diffs be swapped in with ratios that may not be available in 60 series diff centres?
TIA
Yes i searched.....
Posted: Fri Aug 26, 2005 7:31 am
by rock hopper
3.7 4.1 4.3 4.5
i have sold all 4 setups .
4.1 is std in most l/c
Posted: Fri Aug 26, 2005 7:59 am
by beanz2
Add 4.88 and 5.29...
Rockhopper, I didn't know the 4.30 is available for the older diff? I thought they were only for the 100 series diffs.
Dave
Posted: Fri Aug 26, 2005 8:17 pm
by -Richo-
i spose the 5.29's are as rare as rocking horse crap? Are the 5.29's an aftermarket thing? if not what model 60's should i be looking for to get them?
Posted: Sat Aug 27, 2005 12:22 am
by beanz2
Drop Bear wrote:i spose the 5.29's are as rare as rocking horse crap? Are the 5.29's an aftermarket thing? if not what model 60's should i be looking for to get them?
5.29 AFAIK is not a factory ratio, but aftermarket suppliers do have them. I don't know of Aus suppliers, but here is one in the States:
Click for Randy's Ring and Pinion.
BTW when they said "grind for cross pin", they were referring to the semifloater diffs. No need for grinding for full floaters.
Dave
Posted: Sat Aug 27, 2005 12:43 pm
by -Richo-
Cheers for that Dave... i measured up the 4.11's i have and the crown wheel is 9" i thought cruiser diffs were only 8"? Whats the diff, apart from the dimensions? (pun intended
)
Posted: Sat Aug 27, 2005 1:54 pm
by beanz2
Standard cruiser diffs are 9". Only the front on the 1990+ 70 and 80 series are 8" reverse cut. Bunderas also use 8" front and rear.
Cheers,
Dave