Page 1 of 1
KYM brand Uni Joints, any good?
Posted: Fri Aug 26, 2005 9:46 am
by Rough60
Edit: I have bead locks written in the Subject, I meant Uni Joints, lol. Sorry for the confusion.
Hi all,
Just wondering if any one has tried these, also other brands people recommend.
It's for a 60 series cruiser.
Cheers.
Posted: Fri Aug 26, 2005 10:56 am
by ludacris
Do you have a url address to the KYM brands.
LudaCris
Posted: Fri Aug 26, 2005 7:20 pm
by skootin
Try to reuse your old circlips as the new ones are a little thinner.
Posted: Fri Aug 26, 2005 7:31 pm
by dirty harry
never heard of kym brand gmb are very good. sold at all good spare parts shops
Posted: Fri Aug 26, 2005 9:53 pm
by bazooked
gmb, kym, all crap, stick with spicer or drive pro unis.
Posted: Fri Aug 26, 2005 10:05 pm
by Shadow
off topic but how many k's did you uni's last Rough60
mines have only the slightest movement and have done 400K (the rears anyway, fronts lucky to have done 4K)
Posted: Sat Aug 27, 2005 12:36 am
by Rough60
I've had it for 50k but there is 380k on the clock.
vibration coming from behind gearbox when cruising, not on the throttle but not off, so I thought I'd change to see if that helps.
cheers
Posted: Sat Aug 27, 2005 11:00 am
by Shadow
well if its the uni's they would be loose wouldnt they? unless you have big lift?
Posted: Sat Aug 27, 2005 7:17 pm
by Rough60
thanks shadow,
I know they are past there best, and I only hace a 2" lift.
Wanted opinions on brands of Uni's.
Posted: Sat Aug 27, 2005 7:23 pm
by bazooked
look here ^
Posted: Sat Aug 27, 2005 7:24 pm
by bazooked
look here ^
Posted: Sat Aug 27, 2005 7:59 pm
by Rough60
cheers guys,
I've heard spicer are good, know of a stockist?