Page 1 of 1
h260 measurment
Posted: Fri Aug 26, 2005 10:02 am
by scout392
What is the size of the center section the h260 or the h230, i know i could find the diff type on the vin plate.
Could it be that h260 being 260mm ring gear have a 280mm housing to accommodate
And
The h230 being 230mm ring gear have a 250mm housing.
Eric
Posted: Fri Aug 26, 2005 9:30 pm
by mickyd555
without knowing what a h230 looks like exactly, id say those pics are of a h26 from a leaf sprung ute........i could be wrong
hope that helps
Posted: Tue Aug 30, 2005 9:53 am
by scout392
well guy said the pumkin was 250mm so it cant be a h260
thanks anyway
eric
Posted: Tue Aug 30, 2005 4:27 pm
by Josh_GQ
H260 is the big diff right? My old ute had the big one and from top of pumpkin to very bottom was over 300mm
Posted: Tue Aug 30, 2005 6:10 pm
by Steve_GQ
thats not a 260
There bloody huge like mine. This is the compliance plate you have to read. The HH43 in the bottom right stands for the H 260 Diff and 4.375 ratios
Posted: Wed Aug 31, 2005 11:20 am
by scout392
That drive shaft looks enimic(sp?) compaird to the H260.
Q are the drive shafts different sizes 230 and 260
Eric