Page 1 of 1
head job on feroza
Posted: Sat Aug 27, 2005 5:38 pm
by BORN2RUN
hey guys jus wondering if you could help me out. im thinking of swappin the head on my feroza for the hd detomaso head. would there be any problems wif such a conversion?? on paper they look the same but would there be much difference in real life terms? or would it be better to jus send the factory head to be ported, polished, possibly shaved a few thou and a custom billet or reground camshaft fitted for better low down torque (from idle to bout 4000rpm). wat is better bang for buck in mods for na setup.
already have pod filter and full exhaust.
any info would be great.
Posted: Sat Aug 27, 2005 7:35 pm
by murcod
From all the info posted about Detomaso's it appears the only head difference is the cam. I also read somewhere Ferozas have a different thicker head gasket- but don't know if that is correct?
Posted: Tue Aug 30, 2005 2:34 pm
by BORN2RUN
murcod wrote:From all the info posted about Detomaso's it appears the only head difference is the cam. I also read somewhere Ferozas have a different thicker head gasket- but don't know if that is correct?
are you definately sure of this bro?? i sort of dont want too run into any problems wif such a job...also has anyone tried those electric superchargers thingys??
if you go for a belt driven blower where do you put it-wat pulley? i have 94 sx 11 wif no air.
Posted: Tue Aug 30, 2005 3:52 pm
by Sneezing7
I seriously doubt those electric "superchargers" do anything at all.
Don't waste your money...get a real supercharger!
Posted: Tue Aug 30, 2005 5:54 pm
by RobF300
there is a supercharger on ebay at the moment off a 1.6 charade, it may have the mounting brackets and all. would be perfect for the feroza...
Posted: Tue Aug 30, 2005 6:41 pm
by murcod
Posted: Wed Aug 31, 2005 12:26 pm
by BORN2RUN
murcod i hav heard a lot from the guys on daihard.org that the cam compnay you suggest isnt good due to dodgy workmanship and bad customer service. im thinkin of tryin someone here in sydney for cam specs but thanks for the suggestion dude.
the blower is prob wat im lookin at but mountin positon is the problem for me. wat shop do you suggest i see bout this preferably in sydney?
Posted: Wed Aug 31, 2005 12:44 pm
by BORN2RUN
also robf300 couldnt find that blower that was on ebay bro. if you could tell we under wat title it was under or provide a link for me....only if can bro.thanx.
Posted: Wed Aug 31, 2005 6:28 pm
by RobF300
They seem to have taken it off :/