Page 1 of 1
bullbar lift
Posted: Tue Jul 01, 2003 11:26 pm
by Hoonz
ahh slowly chopping and what not
posting pics as i get it done
cut the sides off and gonna add some tube to get more clearance to the wheels ... I need a pipe bender
small video clip when I first got my lockers hahaha
http://f3.grp.yahoofs.com/v1/UPYBP2497b ... 20008.mpeg
and the time it actually rainned here found a nice play ground
http://f6.grp.yahoofs.com/v1/UPYBP3Cecg ... 0pedal.mpg
Posted: Tue Jul 01, 2003 11:29 pm
by Hoonz
both mounts off ... time to get it all square and aquire some 6-8mm plate to re-attach the mounts
Posted: Tue Jul 01, 2003 11:44 pm
by Hoonz
some other pics of flexing the OME 2" ... extremely bored with it atm ...
and its limiting off road
Posted: Tue Jul 01, 2003 11:50 pm
by Hoonz
one of the rear end max'd out .... and my nice 4" rollbar I knocked up one weekend ...
boredom while waiting for CV parts n seals
cost me a carton for the pipe
Posted: Wed Jul 02, 2003 7:31 am
by MKPatrolGuy
The movie links didn't work for me
Posted: Wed Jul 02, 2003 8:00 am
by Hoonz
try that now dood
Posted: Wed Jul 02, 2003 11:33 am
by N*A*M
bad link
nice work with the bar so far though
damo has a bender i think
Posted: Wed Jul 02, 2003 11:38 am
by Hoonz
mmm the links work for me ... any one else havin trouble?
damo didn't say he bought one .... if not I'll just lobsterback it like I did my rollbar .... can only work with what I go here ... mig oxy and a grinder ehehehe
I'll get damo to put the the vids on his webpage
Posted: Wed Jul 02, 2003 12:00 pm
by N*A*M
or maybe he doesn't
can't remember now...
hassle him anyway
Posted: Fri Jul 04, 2003 12:08 pm
by Hoonz
some more pics coming up
Posted: Fri Jul 04, 2003 12:10 pm
by Hoonz
getting shit square is hard
had to make up a jig to get this plate to sit square on the bullbar
Posted: Fri Jul 04, 2003 12:13 pm
by Hoonz
squared the mounts on the ground was much easier
Posted: Fri Jul 04, 2003 12:16 pm
by Hoonz
squared the mounts on the bar and tacked them on
Posted: Tue Jul 08, 2003 8:23 am
by Hoonz
all work suspended for 6 weeks small motor bike accident resulted with 2 broken arms
Posted: Tue Jul 08, 2003 2:13 pm
by N*A*M
dude that's no good
nelson voice: haha!
Posted: Tue Jul 08, 2003 2:51 pm
by bj on roids
hahahaha 2 broken arms
how you typin?
Posted: Tue Jul 08, 2003 2:55 pm
by Ferwoaza
I just had a mental picture of him typing..kinda looked like one of the Thunderbirds in action
Nice work mate btw
Posted: Tue Jul 08, 2003 3:02 pm
by Hoonz
thunderbirds style is good for me
Posted: Tue Jul 08, 2003 4:14 pm
by Damo
Terrafirma wrote::finger:
thunderbirds style is good for me
From now on you shall be known as Virgil
Posted: Tue Jul 08, 2003 10:41 pm
by big red
so hows the bullbar for thunderbird 6 coming along ?
Posted: Tue Jul 08, 2003 11:12 pm
by Hoonz
Terrafirma wrote:all work suspended for 6 weeks small motor bike accident resulted with 2 broken arms
its not
Posted: Wed Jul 09, 2003 12:37 am
by big red
what, can't you weld with your feet
just get brains to do it [or lady penelope]
Posted: Wed Jul 09, 2003 8:57 am
by Wendle
big red wrote:what, can't you weld with your feet
just get brains to do it [or lady penelope]
bahahahah...
give lady penelope one for me!
Posted: Thu Jul 10, 2003 4:46 pm
by bj on roids
give her one in the a$$ from me
just dont finger her
Posted: Thu Jul 10, 2003 5:07 pm
by N*A*M
like this?!
*********IMAGE REMOVED BY RUFF********
NAM i deleted the original thread with the link to this from Chit Chat because it was distastfull and unsuitable so dont you think its unsuitable for this section as well?
Posted: Thu Jul 10, 2003 7:34 pm
by A1
Posted: Thu Jul 10, 2003 9:13 pm
by RUFF
bj on roids wrote:give her one in the a$$ from me
just dont finger her
And BJ this is no better than what NAM posted!!!!
Posted: Thu Jul 10, 2003 9:32 pm
by N*A*M
understood
Posted: Mon Jul 14, 2003 5:14 pm
by bj on roids
Sorry dudes :( I should know better
Posted: Mon Jul 14, 2003 5:17 pm
by Area54
Big smacks, now go to your room!