Page 1 of 1
running gear from a 2001 mod 2.7 go into a 1st gen 4 runner
Posted: Wed Aug 31, 2005 2:13 pm
by Webbie
as per above any knowledge as to wether or not it will fit ,as ive' got a donor running gear and chasis but dont know if it will work ,or how much work would be involved in such a swap, as the ol 3y has shit it self ans thought this could be an option any ideas
Posted: Wed Aug 31, 2005 2:38 pm
by 83 lux
Sweet
Motor will bolt stright up to the G52 when using the bellhousing from the 3rz-fe use your old G52 and t-case, cos the 2001 model will be chain drive. WEAK
Its a Really really easy to conv. to do and the 3rf-ze has more then enough power for a hilux drive train
i have done this conv. to my 83 diesal and wOOT wOOt
i did the swap in just under a week all up
Used the clutch, ect from the 3rz-fe and yer really really easy
Posted: Wed Aug 31, 2005 3:16 pm
by Roctoy
83 lux wrote:Sweet
Motor will bolt stright up to the G52 when using the bellhousing from the 3rz-fe use your old G52 and t-case, cos the 2001 model will be chain drive. WEAK
Its a Really really easy to conv. to do and the 3rf-ze has more then enough power for a hilux drive train
i have done this conv. to my 83 diesal and wOOT wOOt
i did the swap in just under a week all up
Used the clutch, ect from the 3rz-fe and yer really really easy
sounds great when bouncing off the rev limiter too!!!