Page 1 of 1

Changing bundy clutch

Posted: Wed Aug 31, 2005 5:00 pm
by Turbo 42
i am about to change the clutch on my LJ70 bundera

is there anything i should no before i start?

it has a push button HI range 4X4, i dont think it should be a problem
but if anyone has any advice that would be great.

cheers

Leigh

Posted: Thu Sep 01, 2005 2:09 pm
by BundyMonkey
No i have just done it in mine and it was a pretty easy job. I did have the motor out but all in all it would have been easy if was in the car

Posted: Thu Sep 01, 2005 3:17 pm
by +dj_hansen+
From the exedy australia website: http://www.exedy.net.au/sample/catalogu ... ctions.pdf
Some good info in there! and get hold of a gregories manual :D
Push button hi range shouldnt really pose a problem, should have info in the manual about it.