Outer Limits 4x4 Board

Does anyone have any pics of their mounting points for rock sliders for an 80 series without a body lift?

Any bright ideas for a mounting point up front on the drivers side (where that bloody flexible joint is)?

Thanks

Found this but if anyone else has any other suggestions I'd be glad to hear em.

http://www.outerlimits4x4.com/PHP_Modul ... es+sliders

Hi
My sliders mount to the 4 bolts that hold the exhaust bracket below the drivers floor, and the pipe is bent in a semi circle going below the exhaust pipe and protecting it.
Sorry no piccy. Brand of slider is SMC
Andrew

dow50r wrote:Hi
My sliders mount to the 4 bolts that hold the exhaust bracket below the drivers floor, and the pipe is bent in a semi circle going below the exhaust pipe and protecting it.
Sorry no piccy. Brand of slider is SMC
Andrew

Thanks Andrew

Sounds similar to what I'm going to try and do.

I'll post pics of the whole effort once I egt round to it.

Have a look here.
http://george4wd.taskled.com/

RV wrote:Have a look here.
http://george4wd.taskled.com/

Thanks RV

I have been weighing up all the options and think I'm gonna go with something like A1MAV's design.

Thanks for the responses guys.

MMMMMMMMM

I take it you will be taking welding lessons.

sootygu wrote:MMMMMMMMM

I take it you will be taking welding lessons.

Yep!

Lesson 1: Find someone who has just bought a MIG!

Lesson 2: Get them to weld it for you.

Passed top of my class