All started out good. Cut the standard shock brackets, steering damper bracket and trac bar bracket off the new housing. Then cut the shock brackets and the steering damper bracket off the bent housing, cleaned em up ready for welding to the new housing.
Put housing under lux so that I could get the shock brackets in the correct spot, tac welded them in place then checked them, then welded them on fully. So far all is going well.
Got new swevel bearings out of box, put the races in the housing and greesed up the bearings. I then proceded to reasemble the swivel and hubs etc and fitted the steering back in place.
I then went over the the bench and picked up the retainers and bolts for the seals and felts that are on the back of the swivel. I then turned back to the Lux and sat down ready to bolt these in place.
This is when I yelled FARK!!!!!!!!!!!!! very loadly and threw what was in my hands back on the bench and went inside and decided to stay away from the POS Hilux for another week or I`d end up putting a match to it.
Now tell me what you think I forgot to do
