Page 1 of 1
Need Help
Posted: Mon Jul 07, 2003 7:30 am
by Cheezy4x4
Can someone tell me some info on a 90ish Lux steering arm.
1/ What leingth is it.
2/ What thread and pitch.
3/ Are all Lux arms the same
4/ Are RR tie rods the same
5/ Are they left and right threads.
Re: Need Help
Posted: Thu Jul 10, 2003 6:51 pm
by NICK
Cheezy4x4 wrote:Can someone tell me some info on a 90ish Lux steering arm.
1/ What leingth is it.
2/ What thread and pitch.
3/ Are all Lux arms the same
4/ Are RR tie rods the same
5/ Are they left and right threads.
i take it you want to make hysteer?
1. dont know will measure tommorrow
2. 12x1.25 (the studs in the knuckle housing)
3. Yes
4. ?????? dont understand
5. tie rod ends yes, on knuckle housing no.
am i close to the info you were after?
NICK
Posted: Thu Jul 10, 2003 7:53 pm
by dave
Arms are about 200mm long
Posted: Thu Jul 10, 2003 7:56 pm
by NICK
dave wrote:Arms are about 200mm long
why do i have visions of you going holding a welder looking at your truck going ÿeaaaahh that looks ABOUT right
NICK
Posted: Thu Jul 10, 2003 8:02 pm
by dave
