Page 1 of 1
Can a 22re head and injection bolt up to a 22r?
Posted: Thu Sep 15, 2005 11:13 pm
by ausyota
A mate of mine has a Lux with a 22r. Can a 22re head and fuel injection system bolt straight onto his 22r block?
If it can and anyone has the 22re bits can you PM me.
Thanks
Paul.
Re: Can a 22re head and injection bolt up to a 22r?
Posted: Fri Sep 16, 2005 6:19 am
by jr9162
ausyota wrote:A mate of mine has a Lux with a 22r. Can a 22re head and fuel injection system bolt straight onto his 22r block?
If it can and anyone has the 22re bits can you PM me.
Thanks
Paul.
Paul,
Check out this forum
http://board.marlincrawler.com/ - search under EFI or fuel injection conversions. Some of the 22R heads are the same as the fuel injection heads and the HiLux/Surf 22R-E EFI components will bolt on them. Other early 22R heads can e converted using Corolla/Celica 22R-E EFI components.
Posted: Fri Sep 16, 2005 7:01 am
by mico
should fit the blocks are the same, so i can't see why it wouldn't
Posted: Fri Sep 16, 2005 8:38 am
by Bundy_Harry
Check this site out before you commit to anything
http://www.toysport.com/Technical%20Inf ... _notes.htm
I building up an RJ70 Bundera, swapping the 22R (carburetted) for a 22RE (efi), there is a fair bit to consider so do your research, search some of the american pickup forums and get as much information as you can. You can never have too much information
cheers harry
Posted: Fri Sep 16, 2005 7:14 pm
by bludnut
had a bundy with 22r.bloke before me put efi onto the bundys head, simpl bolt on apparently..efi was from a celica i think.