Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ask nick

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Ask nick

Post by bad_religion_au »

as requested by dumbdunce.

nick parts geek :)...

can you give me a definitive answer to which points my 1976 fj40 distributer should be running... the ones reccomended by bosch are too big, and also don't have the post that the moving point swivels off
Spit my last breath
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

where can I get factory cupholders for a 1977 Stout ute?
Free air locker to the first 20 callers!
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

there are to sets to suit a2f motor GD207 and GD202 i think you have be given GD207 so take them back and ask for the others and they are listed in the bosch book i had a look today. and then find a better spare parts shop :D
if you have the guts....follow my ruts!
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

dirty harry wrote:there are to sets to suit a2f motor GD207 and GD202 i think you have be given GD207 so take them back and ask for the others and they are listed in the bosch book i had a look today. and then find a better spare parts shop :D
how about condensors? is there two different condensors?
Spit my last breath
Top
Posts: 267
Joined: Fri Nov 05, 2004 6:42 pm
Location: central coast nsw

Post by dirty harry »

no not for the 2f GD111 is the condensor and GD507 is the rotor button and GD514 for the disy cap
if you have the guts....follow my ruts!
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

dirty harry wrote:no not for the 2f GD111 is the condensor and GD507 is the rotor button and GD514 for the disy cap
well then i'm stumped.. the condenser i was sold (the GD111) didn't work in my dizzy... i ended up putting back in the old one and it worked perfectly...
Spit my last breath
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests