Page 1 of 1
EFI Vitara Diagnostic Trouble Codes
Posted: Sat Sep 17, 2005 7:41 am
by 12uke
I have read the bible and I have a book that tells me how to do it the problem I have Is that a 94 has a 6 pin plug with the black rubber boot on it and the book i have is for a 4 pin plug. Going from left to right with the clip at the top which ones do I stick the jumper wire in.
_1__2___3__
_4__5___6__
Posted: Sat Sep 17, 2005 9:22 am
by kimclive
Hi 12uke,
The plug has six holes but only 4 of them are contacts.
In your drawing the contacts are 1, 3, 4, 6.
The jumper goes from your 3 to 4.
Just check that the centre 2 contacts have no copper inside to ensure that it is the same. My info is that this is the same from 1991 to 1995 models but i stand to be corrected on that.
Pic attached from the manual.
Cheers
Clive
Posted: Sat Sep 17, 2005 6:46 pm
by 12uke
Thats no use to me as I have 6 wires in a 6 pin plug and just for a play I put the jumper wire in 3 and 4 as would do for a 92 top right and bottom left nothing and the check engine has displayed it's self a few times so there has to be a code in there some where.
Posted: Mon Oct 03, 2005 8:18 am
by No Idea
This may Help:
Fault Codes
The Fault Codes can be read by counting the flashes of the “Check Engineâ€
Posted: Mon Oct 03, 2005 11:41 am
by 12uke
That is no help either as I KNOW what and how to get them out of a 92 vit as it has a 4 pin plug but a 94 has a 6 pin plug where do i put the jumper wire. As the avove post SAYS.
Posted: Tue Oct 04, 2005 5:50 pm
by kimclive
Try top right to bottom left.
Posted: Tue Oct 04, 2005 6:10 pm
by nicbeer
kimclive wrote:Try top right to bottom left.
As mentioned this has been tried.
u tried this?
http://suzuki-club.com.ru/Portals/0/wiring2.pdf
cheers
Posted: Thu Oct 06, 2005 7:02 am
by 12uke
nicbeer that page will not load is there another version of it.
Posted: Thu Oct 06, 2005 12:13 pm
by nicbeer
Use
http://babelfish.altavista.com/ on the root www site
http://suzuki-club.com.ru/
Click on vitara and the links on the right
cheers