Page 1 of 1
Bundera Wheel Arch Flares
Posted: Mon Sep 19, 2005 11:56 am
by Skip
Does anyone know where you can buy these things new?
Or anyone got a secondhand set they want to offload?
Cheers
Posted: Mon Sep 19, 2005 1:07 pm
by BundyMonkey
I thought TJM and ARB would have them under the 70series
Posted: Mon Sep 19, 2005 1:24 pm
by Bundy_Harry
For factory flares and mudguards your best bet would be a wrecker. You can still buy them from Toyota (new) but they are horrendously expensive about Sydney City toyota quoted me 863.50 per corner about 6 months ago. I bought a whole bundera with flares for less than that.
I would suggest looking for a cheap vehicle to wreck for your own parts, ring around and surf the net for parts recyclers (wreckers) or even Fibreglass panel shops like the one below I have seen some of the products and it is really top quality
http://www.frp.com.au/stock.htm
get them to send you an email with pictures you should be surprised and a hell of lot cheaper then OEM toyota parts
cheers Bundy harry
Posted: Mon Sep 19, 2005 4:44 pm
by Skip
$863.50 per corner, that would be the gold plated guards yeah?
ARB was a no go, id say TJM wouldn't have them either.
Might be time to hunt around the wreckers.
Posted: Tue Sep 20, 2005 10:04 am
by Skip
Rang all the wreckers in Perth, located a set for the front but still nothing for the rear dammit!!
Posted: Tue Sep 20, 2005 11:56 am
by dumbdunce
Skip wrote:Rang all the wreckers in Perth, located a set for the front but still nothing for the rear dammit!!
rears off 70/73/74/75 series should fit, see if you can get a half kit from TJM. if you need flares and want to offroad, I would just get rubber flex flares, they don't snap when you drive them into a tree.