Outer Limits 4x4 Board

i have now got the majrity of the stuff to put power steering in the cruiser, i was wondering if this picture would be right.
p-pump
R beside the circle:resivour
R beside the line :return
HP - high pressure
B-steering box

would this be right??

oh and i also need the pulley that bolts onto my crank pully, it is a 22R motor if anybody had one that would be awsome.....i pay cash

thanks heaps, greg

All looks ok there greg. Good luck with it.

oh and i forgot last night, does a power steering system need to be bled? or does it just sort itself out?

thanks my45

just fil the resivour up and start the car and top up as it circulates throu

RB zook wrote:just fil the resivour up and start the car and top up as it circulates throu

not a good idear to just start it up, you will cause damage to the pump.

Fill up the resivour lif the front wheels of the deck, and turn from lock to lock with the engine off, about 16 times, keep the resivour toped up while doing this, then star the engine and repeat procedure, then lower the car and your done with no problems.

Cheers

Skippy

thanks guys, i'll lift the front up and try and get as much into the system before starting it!

cheers greg

skippy's GQ wrote:

RB zook wrote:just fil the resivour up and start the car and top up as it circulates throu

not a good idear to just start it up, you will cause damage to the pump.

Fill up the resivour lif the front wheels of the deck, and turn from lock to lock with the engine off, about 16 times, keep the resivour toped up while doing this, then star the engine and repeat procedure, then lower the car and your done with no problems.

Cheers

Skippy

was going to hijak this thread but you have already answered my question Skippy. Thanks

thats the most phallic pwr stg set up I've ever seen

must be a toyota thing