Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power steer Washers

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Power steer Washers

Post by bulldogy »

Hey guys my power steering is leaking from the copper washers where the banjo fitting is hi pressure line i think TB42.
does anyone know what size the washers are?Or part No from nissan
ID
OD
Thanks
Dave
Top
Posts: 27
Joined: Fri Sep 03, 2004 2:31 pm
Location: Mount Barker, SA

Post by thwack »

If you have a look at the pages that I have and tell me the id code of the bits you need I can lookup the nissan part numbers for you.
You do not have the required permissions to view the files attached to this post.
'88 GQ LWB Diesel
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Any diesel workshop will have these on the shelf, for standard banjo fittings in a range of diameters and thicknesses.
Built, not bought.
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Well i cant see the banjo fitting on any of the diagrams the middle 1 looks like the right part assy but it doesnt show the washers or fitting.
Nayway i pulled it off and looked at it an they are 5/8 or 16mm washers.
I just polished them up with a bit of emery and put em back on if that dont work ill buy soem from the auto shop .
Thanks
Dave
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Id be suprised if its the copper washers leaking. It will more likely be a leaking hose crimp on the high pressure hose. Pirtek or Enzed can repair it.

Nick
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

well it is only leakin at the bottom of the banjo fitting there doesnt seem to be any coming from around the actual hose crimp?
When i had the washers off they where a little discoloured in 1 spot on 1 face on both washers .
hopefuly its all good dont want any more dramas.
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

there leeking cause you pulled them off, there a one time use only item, any spare parts store will have there about 20c each :D
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

They where leaking b4 i pulled them off :? thats why i pulled them , too see what was going on.
But yer i have got some new washers and if they leak i'll replace them then.
Top
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

a little bit of heat on the copper , let them cool down then bolt them up . this soften the copper a little bit. this is the tight arse way of doing it or you could go and buy some new ones.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 123 guests