Page 1 of 1
traction bar
Posted: Thu Sep 22, 2005 1:34 pm
by v840
Does anyone know where I can find a ready to weld in trac bar for a sprung over 40 series? I had a look on Big Balls and snakes websites but couldnt find anything. Any ideas of how much should I expect to pay or would it be more worthwhile to make my own up? Cheers.
Posted: Thu Sep 22, 2005 4:00 pm
by ausyota
Superior Engineering do one for $370 or you could probably make one for half that price.
http://www.superiorengineering.com.au/p ... category=3
Posted: Thu Sep 22, 2005 4:22 pm
by v840
Thanks ausyota! Thats exactly what I was looking for but $370 is a bit more than I am willing to pay. Have a few mates who have made em and they havent had any probs so I might go the home made route. Thanks for the link though.
Posted: Thu Sep 22, 2005 4:22 pm
by v840
Thanks ausyota! Thats exactly what I was looking for but $370 is a bit more than I am willing to pay. Have a few mates who have made em and they havent had any probs so I might go the home made route. Thanks for the link though.