Page 1 of 1
80 series bodylift
Posted: Fri Sep 23, 2005 3:22 pm
by RV80
Ok i've searched and can't find what i'm after.. What i would like to know is, what length bolts are required for a 50mm body lift? (don't say 50mm longer than the original ones
) I don't want to pull it apart and then go and buy bolts....
Thank's Grant
Posted: Fri Sep 23, 2005 3:31 pm
by g35me
8 x 155mm
2 x 210mm
Posted: Fri Sep 23, 2005 3:41 pm
by RV80
Thank's Brian.. Dumb question but the long ones are for the front? And i can only get 200mm long..
Posted: Fri Sep 23, 2005 4:35 pm
by g35me
the long ones are the front..5mm is the head thickness. Probably wont matter being 5mm short.
Posted: Sat Sep 24, 2005 3:10 pm
by RV80
Well what a prick of a job
two bolts where rusted in
so i cut the front bolt in half and got it out, then the one at the back door was rusted in, so i flogged the crap out of it with FBH
.. So i'm half way through it now
, but i'm on call so i have to go and unblock someones shit pipe
then back into it.. Will put some pic's up when i'm done..
Grant
Posted: Tue Oct 04, 2005 5:02 pm
by RV80
Here's a pic of some 50mm RHS i used as support for under the back where there was a bracket to the chassis and a rubber attached to the body... I just got the local exhaust shop to zap it on