Outer Limits 4x4 Board

Started to hunt for the bits yesterday to do a disc conversion for the transfer case ,
After a hunt in the parts bin a the local wreckers i came up with two bits so far,
Kf laser rear caliper, has a cable and hydulic setup.
Rt 18 corona front disk ,would you believe this disc when separated from the hub has the same bolt pattern as the zook transfer flange hehe Bonus!
Larry

cool now all you have to do is make your t-case bash plate and incorperate you mount for your caliper to it.i used a manually operated caliper off a trailor.

mmm , well the kf caliper won,t work the cable setup comes out on the bottom so when mounted on top of case its to close to the case , Mud the one you have is it a simple cable operated one from a box trialer ?
Larry

yep.i got it from my local trailor place it cost $90.

I'll have to check them out, thancks mud

Now this is tech the way I like it ... Cheap and useful ..

How good is the holding power for the trailer brake ?? would complement my welded rear nicely ..


Man I got a cross drilled slotted disk on my car .. er don't you mean disks ??

Nah ... disk ...... Just my handbrake

Dozoor wrote:mmm , well the kf caliper won,t work the cable setup comes out on the bottom so when mounted on top of case its to close to the case , Mud the one you have is it a simple cable operated one from a box trialer ?
Larry

Could you please clarify what you have actually bought here from a trailer place?

Is it the disc as well? or just the 'clamp' that holds onto the disc?

thanks

love mud i have not tryed it yet as the spook has been off the road.it will work.
greg
it is just the caliper(clamp)that igot from the trailor place.

The disc was brought at the wreckers , Is an early solid toyota corona.RT18
The transfer flange bolt pattern is the large bolt patern which started in 1989 wide track,
Larry.