Outer Limits 4x4 Board

doing some research for our winch bars
any info would be great

Stu

I just did a 50mm lift on mine

i did 2".....any higher and i would have had to mod more things like steering shafts etc

actually got 56mm on mine

Serious question, who voted the one inch and why>? I've never really heard of anyone doing a one inch body lift? Is it as common as a 2 inch?

I got 40mm (just to be different )
But yeah around 2 inches is common as.

diesel028 wrote:i did 2".....any higher and i would have had to mod more things like steering shafts etc

Not really, i had a 3" body lift in mine and the only real worry was the clutch slave hose, other than that nothing else was more worse off than a 2".

P.S. ive gone to 2" purely to satisfy the engineer.

thanks for the help guys

so 2" it is then

Stu

Reply to the 1" question.... I can hear the laughs already. I have a 15mm lift. About the size of a breadboard actually, 'cause that's what I used. Why? I installed a L.R. fuel tank and when the cab was loaded up the fr$ggin thing would bash under the body. So 15mm of body lift cured it real fast.

Gribble wrote:

diesel028 wrote:i did 2".....any higher and i would have had to mod more things like steering shafts etc

Not really, i had a 3" body lift in mine and the only real worry was the clutch slave hose, other than that nothing else was more worse off than a 2".

P.S. ive gone to 2" purely to satisfy the engineer.

2" lift - steering is at max, brake lines at max, power steering hoses at max, fuel hose from filler to tank at max.

the most popular kit i sell is 50mm although i do sell a few 30mm and some 75mm