Page 1 of 1
Anyone have any pics regardin weld on beadlocks
Posted: Mon Jul 14, 2003 9:15 pm
by A1
Well as the headin says any pics or links to sites with in depth advice and pics ..............I realise this has been aske recently but im pretty sure there werent any links or pics in this similiar post
I have read the 1 of the posts on pirate in the tech section that has pics but yet not much info really regardin placement and finished wheel without outer ring fitted
Your advice in this would also be great
Dan
the chromys might stay at the shop even though i like the BLING and the look , your opinions have swayed my preference slightly so im checkin out all my possiblitys
Posted: Mon Jul 14, 2003 9:27 pm
by A1
Well found this 1 seems to be the best so far with the actual pics side to giuve sum insight of where they are actually welded
http://www.rockstomper.com/catalog/wheels/beadlocks.htm
Has any 1 that has dunn there own beadlocks had any dramas with the trueness of the rim post weldin ?
Gee hey im answerin my own posts
Posted: Tue Jul 15, 2003 6:16 pm
by A1
So i take that as NO then
.................................... :arrow:
Posted: Tue Jul 15, 2003 6:52 pm
by onall4
Re: Anyone have any pics regardin weld on beadlocks
Posted: Tue Jul 15, 2003 6:58 pm
by A1
A1MAV wrote:Well as the headin says any pics or links to sites with in depth advice and pics ..............
I realise this has been aske recently but im pretty sure there werent any links or pics in this similiar post I have read the 1 of the posts on pirate in the tech section that has pics but yet not much info really regardin placement and finished wheel without outer ring fitted
Your advice in this would also be great
Dan
the chromys might stay at the shop even though i like the BLING and the look , your opinions have swayed my preference slightly so im checkin out all my possiblitys
Thanx Pete
Hence the reference to this post u added more after the same kind of link as ther rockstomper site
And if ya posted so i would c that u sell these ,im already aware and u may well be gettin a call soon
Dan
Posted: Tue Jul 15, 2003 10:42 pm
by 65Mog
Try Oz Wheel in Sydney, I'm not sure what his phone number is but he advertised in 4WD monthly up until about 12 months ago, 6mm inner and 4mm outer.