Page 1 of 1
LT 230 questions
Posted: Sat Oct 01, 2005 10:06 am
by cookiemonster
Hi guys, I am looking for a LT 230 transfer case for a custom conversion that I am doing. Just curious what high range and low range ratios came in what modles of Land Rover/Range Rover. Need to know which one to buy!
Thanks!
Posted: Sat Oct 01, 2005 12:27 pm
by tony cordell
1.2 rangies/discoveries
1.4 Defenders
1.6 army defenders
not a comprehensive list but a general guide with a seral number I can give you the specs
Posted: Sat Oct 01, 2005 1:16 pm
by Loanrangie
Rangie with torqueflite auto and lt230R has the highest high range 1.003/ 1.
Posted: Sat Oct 01, 2005 1:31 pm
by uninformed
i think in some auto's(only range rover ) there was a 1-1 high range.
the 1.66-1 high range was in the four cyl petrol, n/a diesel d110
there are some aftermarket low range gear sets
Maxi-drive 30% low range gear set is 4.32-1
Maxi-drive 49% low range gear set is 4.95-1
these can be used with any high range gear set
Ashcroft in the uk make a crawler gear set which is an 85% reduction but can only be used with the 1.2-1 high range and comes as a complete set.
they also make a bolt on underdrive that mounts to the lt230
Posted: Sat Oct 01, 2005 7:28 pm
by Bush65
The later models with taper roller bearings on the intermediate gears are better than those with needle roller bearings.
Posted: Sun Oct 02, 2005 6:14 pm
by HSV Rangie
Read FAQ.
its all there.
Michael.
Posted: Sun Oct 02, 2005 8:04 pm
by djam1
Posted: Sat Oct 08, 2005 8:46 am
by Bull Bar Cowboy
Look here for the info
,
http://www.ashcroft-transmissions.co.uk/part_9.html#pa1
Low range is the same on all LT230R/T's
Ian
Posted: Sat Oct 08, 2005 2:11 pm
by Daisy
