Outer Limits 4x4 Board

Hey all

I recently posted about the clutch on my MQ not working at all well the gearbox is out and on the ground. Well it was the clucth plate that was screwd one of the four springs that are on the plate had snapped the retaing lip and come out and the smaller inner one is lodge in the drive plate behind the fingers. has anyone heard of this before and what casues it? Tommorow we will attempt to refit the gearbox with only a crappy small trolley jack that does not even reach half the hight to get it back in.

Thanks

http://www.outerlimits4x4.com/PHP_Modul ... highlight=

had 2 clutches in my old torana spit crap thru the clutch fingers

on one clutch the plate rivet come out and bent three pressure fingers out

u never heard a noise that would make u cringe so bad ( except my ex's mums voice )