Outer Limits 4x4 Board

Well after months of wanting.. A mate of mine finally made some up for me.

I'm hoping the steel is thick enough so that the shackle is stong enough to withstand whatever it is going to take... I'm guessing only time will tell though.

I've wound up the front RHS, but couldn't crack the top nut on the front LHS, so i'm hoping to get that done today or tommorrow, either with an oxy or a rattle gun or both if it's that stuburn..

looks good mate, hope they hold up for ya!

Luke

how much longer are they

from memory it was about 80mm longer, with a brace in the center.

icebreaker wrote:from memory it was about 80mm longer, with a brace in the center.

cool.... they looked longer in the pic

well it's about double from eye to eye really..

my only concern was the leafs look flat as a tack, but having just had a look through some old photo's i've noticed something curious.. my front was higher than the back... And when dialing up the front end on the weekend, I noticed the front has already been wound up abit...

So not i'm thinking the rear parabolic springs have been reset at some point and have sagged like a mofo... Or pos. are just saggy like an old womans b00bs.. hehehe

Might have to go hunting for some other springs, and then put a smaller shackle on...

She does handle 100x better on the road though, with the weight pushed on the front abit, it was abit of a battle to keep it rolling in a straight line on the highway, but she certainly seems to be alot smoother now.... *shrugs*

Thats prob half my problem with m back up high and the nose wound up as high as it can go. Wanders a bit on the highway.

hi icebreaker,
aside from the differences in height, has there been any change in articulation?

not sure mate, I haven't been off road at all yet, or tried testing it to notice any change..