Page 1 of 1
Question....lifting 80 series
Posted: Mon Oct 03, 2005 9:17 am
by 88 Shorty
Can someone please tell me what is involved in lifting an 80 by 4". eg aside from the obvious (needing shocks and springs) do i also need new panhard rods, caster bushes etc?
What about with a 3" lift?
Also how high does it need to be to fit 33s or 35s?
Thanks alot.
Re: Question....lifting 80 series
Posted: Mon Oct 03, 2005 12:18 pm
by 80diesel4play
88 Shorty wrote:Can someone please tell me what is involved in lifting an 80 by 4". eg aside from the obvious (needing shocks and springs) do i also need new panhard rods, caster bushes etc? extended brake lines, catsor kit.
What about with a 3" lift? just a castor kit(or redrill your standard diff - I did mine - sweet and no floggged castor bushes!
Also how high does it need to be to fit 33s or 35s? 33's - 2" lift 35"s - 3".
You can squeeze 37's under with 2" body and 3" coils...
Thanks alot.
Posted: Tue Oct 04, 2005 12:26 am
by Suspension Stuff
For a 3" lift
Coils $150 a pair
Shocks $95 each for Dobinsons or $120 each for Procomps
Castor Correction bushes $100.
For higher lifts.
Panhard rods $200 each including bushes
Castor correction plates $240 for set
Possible Upper trailing arms $140 each or Lower trailing arms $200 each.
Free delivery for all this stuff
Shane at
shanetamie@bigpond.com or 0409 593 414
4WD STUFF