Page 1 of 1
Square Blocks
Posted: Tue Jul 15, 2003 5:47 pm
by Nor
Hi there guys.
Is there a problem in using square blocks for my body lift?
Thanks.
Posted: Tue Jul 15, 2003 7:15 pm
by bazzle
No
But should be big enough to cover all of circular mount.
Ensure ones under doors dont impinge on the taper on the inner floor area.
Bazzle
Square Blocks
Posted: Tue Jul 15, 2003 7:29 pm
by Nor
Thanks for the tip.
The blocks I intend to use are square blocks of 100mm*100mm and 50 mm thick.
What do u think?
I have a LWB, so I'll use 10 blocks
Posted: Tue Jul 15, 2003 7:49 pm
by bazzle
Should be ok.
You will have to relieve them where they touch other bits, ie front valance
and as I said grind a slight taper under floor ones
Bazzle
Posted: Wed Jul 16, 2003 12:09 am
by bogged
they need to sit flat against the body work, and I think they will be a little big for the job.
Try them, you can always hack them to make fit!