Outer Limits 4x4 Board

Body lift itself doesnt bother me at all, plenty of info out there and it looks like a straight forward job. its the actual modifying the bar to suit.

done a search and couldnt find any photo's or clear descriptions on what people have done. The bar and car in question is a '88 swb GQ with an ARB winch bar.

had a quick look at it and I'm thinking that the C type section that hugs the chassis can be scalloped out and extended and gussetted to suit, but I got this bad feeling its not gunna look as "standard" as it should so any pics or idea's of what people out there have done would be much appreciated. (or someone in melb western suburbs that would and can do it cheap)

Cheers
Simon

come on, someone out there has had to have done this before and be able to point me in the right direction?

STOP SOOKEN,

I did't do it my mate did, so i cant help u with the details

you could also cut the front of the chassis and lift it.
just cut it of past the body mounts ,
bolt it back up ,
weld the chassis and gusset it.

bundyrum4x4 does new laser cut brackets fitted for about $150 I think.

you only got ask dude. i got a grinder and a welder its a simple cut and shut. wount take much longer than half a slab. i even got a bar to copy it off.

or go to arb southern in dandenong and get some brackets to suit thsy cost about 80=100 bucks and they are fully bolt on no welding required