Outer Limits 4x4 Board

a bloke in our club has an o4 rodeo single cab and has just bought a set of radial claws in 33in. No worries about lifting the tray to fit under but was wondering what he needs to do to the front end. Wind up torsen bars only or will he need to do a body lift of an inch or two.

if a body lift is needed what other problems will be likely to occur, radiator and mounts, gear shifters etc.

any info will greatly be passed on

cheers george

I don't know much about the RA but this is for my 97 Rodeo. Will give you some idea of bodylift at least.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=50512

As for suspension you can buy 2in lift rear leaf springs and the front I imagine you will only be able to wind it and then fit low profile bump stops. You can buy extended upper control arms for some Isuzus to give 3in in the front but you will then need to lower the front diff so you don't kill the CVs. Not sure if this still relates to an RA but I would think it does.