Outer Limits 4x4 Board

has anyone out there modified the std nissan GQ uppers and lowers. I know there weak as piss but I'm also not really cashed up (I really chose the wrong hobby hey?)

was chatting with a mate and the idea come up to chop the standard arms run 16mm? all thread down the centre a welded nut on one end and lock nuts down the other. Then to try get a lil strength back run some small gussets along the arms.

is this gunna be a waste of an afternoon and a set of arms or will it stop my vibrations for a few months till the bank balance is looking a bit better?

if you were gonna do something like that you'd wanna make sure your pretty handy with a welder and that you use the correct strength steel and stuff cause if that breaks while on the road your in big trouble

I have made some up myself in the past but if you decide not to go for the bodge job I will sell you some new adjustable upper trailing arms for $280 for the pair. Free freight.
The adjustable lower ones are $380 for the pair but you only need uppers or lowers not both to correct your pinion angle.

Shane
0409 593 414
4WD STUFF

What brand are your lowers and what bushes do they come with?

Superior Engineering is who I use for that stuff.

www.suspensionstuff.com.au

Shane

heavy duty lowers. non adj. factory bushes $200.

i built them for mine but got 3rds sponsorship before i used them

0402337734

I got my heavy duty non adj. lowers for $130 brand new, this was from Trail Track and Outback in Ferntree Gully. This was without bushes.

mine inc good s/h factory bushes which are $60 each new roughly

beer is one hell of a bargaining tool shakes.
i have the gear to mod anything and keen to give it a shot it even got spare bushs and a spare set of control arms.

[size=18][/size]so again call me and we can talk.