Outer Limits 4x4 Board

I went to the local tube mill and tried all the steel for the shackel rubbers to fit up the guts of ,but to no avail.i'm going to make drop hangers front and rear so if any one knows what size it is please let me know .Its about 29-30mm but its corect size would be great.CHEERS

Come on you blokes someone must know, or did you all but your new drop hangers

can you explain more in what you after

Im making new drop hangers front and rear and need to find the tube the shackle rubbers go into as i have shit loads of plate and RHS to make the side plates just need the tube. UNDERCONSUMSTUMBLE

dont you just need new bolts repco sell greaseable ones for $9 each

or use your old bolt

If u need something that has an inside diameter of 29-30mm try some 32nb schedule 160 pipe. It has an outside diameter of 42.2mm with 6.35mm walls which means it should have a 29.5mm inside diameter .

roberts wrote:dont you just need new bolts repco sell greaseable ones for $9 each

or use your old bolt

I don't think he mentioned bolt anywhere

Shane wrote:If u need something that has an inside diameter of 29-30mm try some 32nb schedule 160 pipe. It has an outside diameter of 42.2mm with 6.35mm walls which means it should have a 29.5mm inside diameter .

thankx shane thats what i was after.

Or you could use a larger OD bush that would provide more flex than the standard Hilux ones.