Outer Limits 4x4 Board

Where is the best place to purchase 5 inch exhuast pipe around N/S of Brisbane.

LudaCris

probabley northside diesel spares at burpengary

just wodering y that would be one big mother of an exaust

probably because its going on one big mother of a 4WD...

unles ur running like a 7.3ltr turbo deisle v8 all u will do with a exaust that big is lose power.

if it going on somin around 4.2 turbo mark 3.5 to drivers seat then 3i strait throo.

if it aint turbo don't go bigger then 2.5

no 4x4 needs 5". 4" flows roughly double 3"" which is roughly double 21/2"


if you want 4" s/steel 1.6mm wall i have 4m of it

0402337734

It is actually going on my new 1.0 Litre suzuki that has had all head work done so I want it to flow nice and smoothly with the added extra power. Plus the Bling factor. No actually it is for a custom airbox system going through the cab.

LudaCris

have you thought of running oval pipe so it doesn't hinder on passenger floor space and leg room ???

ludacris wrote:It is actually going on my new 1.0 Litre suzuki that has had all head work done so I want it to flow nice and smoothly with the added extra power. Plus the Bling factor. No actually it is for a custom airbox system going through the cab.

LudaCris

this is something i have actually been thinking about doing.......keeps the snorkel away from trees and underbody damge too........i might need to add that to the list cris

ludacris wrote:It is actually going on my new 1.0 Litre suzuki that has had all head work done so I want it to flow nice and smoothly with the added extra power. Plus the Bling factor. No actually it is for a custom airbox system going through the cab.

LudaCris

You may then need 10" for the induction side to make sure the flow is balanced on both sides of the engine.

mate has run that set up for years in a dual cab dyna on 60 series axles .

so if water comes in the cab in a rig that big u know u have picked the wrong pot hole to drive threw

Chris have you thought of running plumbing plastic drainage pipe.
You can get elbows, drains etc and it is easy to work with.
J Top

Just run flexy pipe from the top of the snorkel and in through the passenger window and remove when not needed.

Also if you are thinking about running the custom air intake from inside the cab for the zook it will be sucking so much air you may need oxygen masks in the cab if you drive with the windows up, thats if they don't implode from the vacuum.

TUFFRANGIE wrote:Just run flexy pipe from the top of the snorkel and in through the passenger window and remove when not needed.

Also if you are thinking about running the custom air intake from inside the cab for the zook it will be sucking so much air you may need oxygen masks in the cab if you drive with the windows up, thats if they don't implode from the vacuum.

i think cris's idea is to run the snokel setup right through the cab and out the back wall......(this is a ute isnt it cris???) well thats my idea anyway........

Yeah going to run it straight through the cab and out the back wall.

I have not thought of plumbing pipe but that sounds a lot cheaper and easier to work with. Thanks.

F*** the navies leg room if he is silly enough to sit in the passenger seat .

No actually I am going to run it behind the dash then up through the middle of the cab.

Thank you all for the imput.

LudaCris