So the diff locked up the other day, completely, wheels won't turn at all.
Am I likely to have problems other than the diff? I.E would the axles or bearings be a problem?
Thanks
Benno
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Seized diff - causing other problems?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Jack the wheels up, disconect the driveshaft, and things should be a bit more clear.
Assuming no LSD:
If one wheel remains stuck and the other turns the pinion then it is a seized axle or brakes.
If both wheels turn in opposite directions with the pinion stationary, then the pinion or diff center side bearings are seized.
If both wheels turn the same way and the pinion turns then the side gears/spider gears are seized.
With LSD:
Bit more difficult to isolate due to preload (may need you and a mate with a breaker bar on the either side), the second test won't work.
Sounds like you may have done a tooth, which has been jammed and embedded somewhere where it shouldn't be.
Assuming no LSD:
If one wheel remains stuck and the other turns the pinion then it is a seized axle or brakes.
If both wheels turn in opposite directions with the pinion stationary, then the pinion or diff center side bearings are seized.
If both wheels turn the same way and the pinion turns then the side gears/spider gears are seized.
With LSD:
Bit more difficult to isolate due to preload (may need you and a mate with a breaker bar on the either side), the second test won't work.
Sounds like you may have done a tooth, which has been jammed and embedded somewhere where it shouldn't be.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
may also be crown wheel bolts come loose jamming into the diff housing inside. it aint pretty eitherDAMKIA wrote:Jack the wheels up, disconect the driveshaft, and things should be a bit more clear.
Assuming no LSD:
If one wheel remains stuck and the other turns the pinion then it is a seized axle or brakes.
If both wheels turn in opposite directions with the pinion stationary, then the pinion or diff center side bearings are seized.
If both wheels turn the same way and the pinion turns then the side gears/spider gears are seized.
With LSD:
Bit more difficult to isolate due to preload (may need you and a mate with a breaker bar on the either side), the second test won't work.
Sounds like you may have done a tooth, which has been jammed and embedded somewhere where it shouldn't be.
just a little left of insanity :)
Who is online
Users browsing this forum: No registered users and 115 guests