Outer Limits 4x4 Board

Posted: **Wed Oct 12, 2005 6:08 pm**

would a 60 series power steer pulley that runs of the water pump fit onto the water pump on my 2f in a 45? im assuming the pulley is of a 2f?

cheers

Posted: **Wed Oct 12, 2005 7:05 pm**

you might also need to swap to a 60 series water pump

i started looking into this for my own power steering setup but ended up custom mounting the pump so didnt need the doiubly pully

Posted: **Wed Oct 12, 2005 7:20 pm**

k if i get the 60 water pump will it bolt straight onto my motor and will the inlet and outlets be the same

Posted: **Wed Oct 12, 2005 7:26 pm**

theres a few different types you will be best off visiting a decent parts store and confirming that it will be the same as yours you may need to swap to 60 series fan aswell

Outer Limits 4x4 Board

60 power steer water pump pulley onto a 45

60 power steer water pump pulley onto a 45