Hey guys,
Need some help. I'm changing the locker-in thingy on the drivers side for the 4wd. (91' Rodeo) I need some help with the assembly.
Ok the way i've sorta figured it is that you turn it, and it locks in the axle?
I'm having trouble getting the spring to sit in properly, etc. So can someone explain to me the operation or give me a diagram.
That would be handy dandy.
Thanks guys!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Front 4wd
Moderator: Moderators
Front 4wd
It's not the speed that kills you... it's the sudden stop.
Temporary Australian
What brand hub are they? should be the same as the '93 model i guess..... is there any way you can take a picture of it and explain what you are trying to do? they can be a pain until you work them out, once done, you can do them pretty easily.
There is no "I" in Team, but there are 5 in Individual Brilliance
Who is online
Users browsing this forum: No registered users and 2 guests