Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux tube bar
Moderators: toaddog, Elmo, DUDELUX
hilux tube bar
COULD ANYBODY HELP ME IM AFTER SOME PLANS,DESIGNS AND MEASURMENTS FOR A FRONT TUBE BAR TO SUIT MY 83 MODEL HILUX ANY INPUT WOULD BE AWSOME THANX...
Minion #1
Firstly, take the caps lock off....
Secondly there are very few pics for you to look at currently as pics are down, but do a search for tube bars in the general tech, suzuki and toyota sections.
This will give you some ideas on material selection and hopefully some of the pics are up so you can see some different styles.
Not many people bother with plans or measurments, most decide on a style, maybe make a sketch or two of it on the front of their truck, take the old bumper off and start fabbing.
If you don't have the skills or equipment post up and someone from your relevent state will most likely chime in and offer to make one for you.
You will need a welder, grinder, a cheapo bender from ebay, supercheap or tool shop, a dawn die for the bending of the tube [you'll find this in your searching] and some steel.
If you don't find what you need on outerlimits or have LOTS of spare time
on your hands, look through http://www.pirate4x4.com, mostly in the toyota section and you'll find many many tube bars to check out.
Happy hunting.
Secondly there are very few pics for you to look at currently as pics are down, but do a search for tube bars in the general tech, suzuki and toyota sections.
This will give you some ideas on material selection and hopefully some of the pics are up so you can see some different styles.
Not many people bother with plans or measurments, most decide on a style, maybe make a sketch or two of it on the front of their truck, take the old bumper off and start fabbing.
If you don't have the skills or equipment post up and someone from your relevent state will most likely chime in and offer to make one for you.
You will need a welder, grinder, a cheapo bender from ebay, supercheap or tool shop, a dawn die for the bending of the tube [you'll find this in your searching] and some steel.
If you don't find what you need on outerlimits or have LOTS of spare time
on your hands, look through http://www.pirate4x4.com, mostly in the toyota section and you'll find many many tube bars to check out.
Happy hunting.
Navigator for Amelia in the 2007 stroller pushing championships !!
Who is online
Users browsing this forum: No registered users and 15 guests