Page 1 of 1
Moving the Radiator back
Posted: Tue Oct 18, 2005 3:43 pm
by Mudzuki
Are there any issues with moving the radiator back an inch or two?
I would like the extra clearence for my winch, and i already run a thermo.
Cheers
Re: Moving the Radiator back
Posted: Tue Oct 18, 2005 5:16 pm
by RaginRover
Mudzuki wrote:Are there any issues with moving the radiator back an inch or two?
I would like the extra clearence for my winch, and i already run a thermo.
Cheers
As long as the engine won't clean it up I can't see the problem, different brackets and hoses should all be ok
Tom
Posted: Tue Oct 18, 2005 5:39 pm
by HEY CHARGER
You shouldnt have a problem as long as its not in the way of anything ,
and the rule of thumb from what ive been told is that if you have a fan shroud the best place for the fan to be in relation to the shroud is the blades to be half in the shroud and half out .
Posted: Tue Oct 18, 2005 9:34 pm
by Mudzuki
The thermo is bolted to the radiator (like that when i bought it) and the standard shroud is still on there.
Thermo is heaps smaller than factory, but i haven't had any issues with it yet.
Thinking an inch might be about the max after closer inspection.
Ill just make it bolt on, so if i dont like it, i can change it. Just have to try it before the winch bar gets fabbed.
Posted: Tue Oct 18, 2005 9:44 pm
by HEY CHARGER
Too Easy !