Outer Limits 4x4 Board

Want to do a 3 inch suspension lift on an 80 series cruiser.
Looking for someone who knows what they are doing as far as getting shock lengths right and castor correction. Not someone who uses trial and error.

Not like the last time I got the six inch done by a large company.....
There idea of service was fit the kit, then just keep stuffing around with it till you get it right. I also had to go back after they got spring and shock lengths miss matched.
Thanks
Steve

bruiser wrote:Want to do a 3 inch suspension lift on an 80 series cruiser.
Looking for someone who knows what they are doing as far as getting shock lengths right and castor correction. Not someone who uses trial and error.

Not like the last time I got the six inch done by a large company.....
There idea of service was fit the kit, then just keep stuffing around with it till you get it right. I also had to go back after they got spring and shock lengths miss matched.
Thanks
Steve

Ring JohnZ on this forum.

He LOVES cruisers - sorry John - and knows his shite inside and out when it comes to getting the max travel and best ride out of them.

Does not sell you an off the shelf kit and you get to try it and swap it until you get EXACTLY what you are after.

Custom springs in length and rate are no problem either - that's what he did for me.

His number is 0418 780 611.

Tell him that Michael with the Defender gave you his number.

When you call him, make sure you allow heaps of time....he answers any questions you have with about 10 possible solutions and gives you the pros and cons of each one

Micka

Talk to ludacris on er. Hes got his own shop at caboulture. Hes great


Cris's 4 X 4 Accessories & Suspension 0417 616 764 www.4x4accessories.com.au