Page 1 of 1
75 Series R&P ratio's
Posted: Mon Jul 21, 2003 1:28 pm
by all4fun
Are there 5.13:1 Ring and pinions available for the full floating rear axle of a 75 series Landcruiser. I am thinking of purchasing a custom Rockcrusher 60R front axle and would like to run this ratio if possible while still maintaining the standard rear Full Floating Toyota axle as these are plenty tuff.
Posted: Mon Jul 21, 2003 1:57 pm
by spazbot
how much are the front rockcrusher diffs ?
i think you can get 3.70, 4.11. 4.10, 4.56, 4.88, 5.29, 5.38 aftermarket for the 75 maybee one of those will match the d60
Posted: Mon Jul 21, 2003 2:11 pm
by spazbot
i think you can get a 4.88 d60 gearset so thats prolly your best bet
Posted: Mon Jul 21, 2003 2:33 pm
by bj on roids
NO!
Posted: Mon Jul 21, 2003 2:42 pm
by spazbot
more info bj am i wrong ??
Re: 75 Series R&P ratio's
Posted: Mon Jul 21, 2003 5:04 pm
by bj on roids
all4fun wrote:Are there 5.13:1 Ring and pinions available for the full floating rear axle of a 75 series Landcruiser.
NO