Outer Limits 4x4 Board

With nissan trials in a week i have a small problem.
the rear coils are coming out under flex.

there are a few solutions
tie them in with (top)cable ties,hose clamps.weld em

bottom.weld a bit of metal over the bottom bit

will it fuk the spring if i weld a bit of metal at the bottom and the top.
it would look like the spring is stretching

Any other ideas? got to be quick and easy

thunder wrote:With nissan trials in a week i have a small problem.
the rear coils are coming out under flex.

there are a few solutions
tie them in with (top)cable ties,hose clamps.weld em

bottom.weld a bit of metal over the bottom bit

will it fuk the spring if i weld a bit of metal at the bottom and the top.
it would look like the spring is stretching

Any other ideas? got to be quick and easy

Weld it to the hangers not the spring then you can bend them out of the way if you have to change the springs out

Tom

RaginRover wrote:

thunder wrote:With nissan trials in a week i have a small problem.
the rear coils are coming out under flex.

there are a few solutions
tie them in with (top)cable ties,hose clamps.weld em

bottom.weld a bit of metal over the bottom bit

will it fuk the spring if i weld a bit of metal at the bottom and the top.
it would look like the spring is stretching

Any other ideas? got to be quick and easy

Weld it to the hangers not the spring then you can bend them out of the way if you have to change the springs out

Tom

agree weld a clip to the spring mounts

If u jsut weld a keeper to the bottom spring perch then the top wil locate itself when it goes bac in... that way itt wont strech ur spring