Outer Limits 4x4 Board

Oh boy... here we go for the LAST TIME...

I am sorry for not posting enough info right at the start - that was MY BAD. I thought that would make it less complicated, but it obviously did the opposite. I also, unfortunately, was away from my pc for most of the weekend celebrating my birthday - I did not realize how much this had escalated in the mean time.

I am sorry Companies 1-3...

And to round things off, here is my final summary:

I did not do this work - this is the 1 thing I am sure of. Why would I do this, drive out in the middle of the bush, snap the arm and then spend 4 hours trying to get my rig home??

I have been in contact with all 3 companies - all 3 companies were involved in making or modifying the arms in some way. They are all quite open to this fact. I will NOT give any details here of who did exactly what.

All 3 companies do not believe that it was their work that failed.

So again - sorry for this major disturbance in the force. The company that made the arms is not at fault, nor are any of the companies that modified the arms.

I am blaming no-one, as there is clearly no way to know who did what.

Mr Moderator - lock away...

Thankyou FT.

Now if you had posted all the facts to start with this would never have happened. But its too late for that now.

A WORD OF WARNING TO OTHERS

If you have a prob with a companies work dont come here and post anything about it unless you are 100% sure the company is to blame.

This will be looked at a lot more from now on and we will try and moderate this as well as we can.

We dont want all this happening again.