sd 508 sanden a/c pump
Posted: Tue Jul 22, 2003 8:50 pm
can anyone tell me which vehicles these pumps are fitted to.
cheers
steve
cheers
steve
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
sd 508 sanden a/c pump
Page 1 of 1
Re: sd 508 sanden a/c pump
Posted: Tue Jul 22, 2003 8:55 pm
Chrysler Sigmas... thats where I got mine, Pick a Part.
Posted: Tue Jul 22, 2003 9:37 pm
Just about every vehicle ever sold without Factory Air. This is the most common pump for aftermarket airconditioning companies to use.
Posted: Tue Jul 22, 2003 9:51 pm
I have also seen 510 versions of the sanden compressor. Slightly bigger in displacement
Posted: Tue Jul 22, 2003 10:21 pm
arnt these the same as the endless air pumps ??
Posted: Wed Jul 23, 2003 8:11 am
RUFF wrote:Just about every vehicle ever sold without Factory Air. This is the most common pump for aftermarket airconditioning companies to use.
yep, I have one on my ford maverick with aftermarket A/C
Posted: Wed Jul 23, 2003 9:35 am
\hypolux wrote:arnt these the same as the endless air pumps ??
Yes, but $15-25 from pick a part, Endless air is $300+
Posted: Wed Jul 23, 2003 6:07 pm
bogged wrote:\hypolux wrote:arnt these the same as the endless air pumps ??
Yes, but $15-25 from pick a part, Endless air is $300+
endlessair = $395
i got 2 from a wreckers 4 free
Posted: Wed Jul 23, 2003 7:47 pm
hypolux wrote: endlessair = $395
i got 2 from a wreckers 4 free
Genuine Endless air for free.? Give ya a slab for one?
Posted: Wed Jul 23, 2003 8:17 pm
suppose i better block my ac up i just disconnetect the hose as they where in the way of the turbo and it need gasing. so its probably ull of water to. so all i need to do is hook up some 12v pressure switchs to a tank and do i tap a grease nipple into the plug on the top that looks like it could be a sump plug yeah. thanks chris
Posted: Wed Jul 23, 2003 9:10 pm
sd508 is 8 cubic inch, sd510 is 10 cubic inch.
Posted: Thu Jul 24, 2003 12:09 am
Try this link for Sanden and York service manuals - might help in identification of diff models etc
http://www.jeeproject.com/downloads.htm
cheers
MattC
http://www.jeeproject.com/downloads.htm
cheers
MattC
Posted: Thu Jul 24, 2003 10:55 am
bogged wrote:hypolux wrote: endlessair = $395
i got 2 from a wreckers 4 free
Genuine Endless air for free.? Give ya a slab for one?
well they the same as endless air just not blue and dont have a grease nipple in the oil fill plug
Posted: Thu Jul 24, 2003 7:12 pm
anyone know what the 510 is off??
Posted: Fri Jul 25, 2003 7:51 am
So is the grease nipple the only mod that endless air do to their compressors?
So with the endless air setup where does the grease go?
I mean if oil ends up pumping through with the air in standard form then wouldnt the grease end up in your air lines eventually too?
or am I missing something?
Paul.
So with the endless air setup where does the grease go?
I mean if oil ends up pumping through with the air in standard form then wouldnt the grease end up in your air lines eventually too?
or am I missing something?
Paul.
Posted: Fri Jul 25, 2003 11:52 am
The grease is pumped into the sump, the other side of the piston rings from where the air gets compressed, much the same as your normal engine. As far as I know, this is the only mod they do to the compressors, then paint em pretty blue. That, and fabbing a mount to suit your car. hard to justify the price they wanna charge.
Posted: Fri Jul 25, 2003 9:37 pm
ausyota wrote:So is the grease nipple the only mod that endless air do to their compressors?
So with the endless air setup where does the grease go?
I mean if oil ends up pumping through with the air in standard form then wouldnt the grease end up in your air lines eventually too?
or am I missing something?
Paul.
yes you do end up with grease in your lines, has just happened to me and clogged the line and loaded up the compressor pretty bad, will pull it apart when i can and have a look, and also see about converting back to oil filled.