Page 1 of 1

Toyota Pitman Arm

Posted: Sat Oct 29, 2005 10:59 pm
by CAP51Z
hi,

i have put an IFS lux box into my zook, but am having clearance issues with the pitman arm.
i am in need of a toyota Pitman Arm, (ive been told they all have the same spline & taper) that is flat, or almost flat, (with no step) & approx 1-2 cm shorter than an 80 series arm. If i have the 80 series one "flattened", it will become longer, where i need it to be shorter, so this is not an option. A 75 series is also no good to me. Any ideas? Maybe a hiace?
im goin out to a wreckers to have a look, but thought someone here may know of one, or be able to point me in the right direction.

all replies appreciated.

Peter.

Posted: Sun Oct 30, 2005 8:50 am
by 4sum4
2wd hilux or rocky feroza but you will need a end to suit

Posted: Sun Oct 30, 2005 10:03 pm
by CAP51Z
thanks mate.

if i use the 2wd lux pitman arm, do you know if they use the same size tie rod end as a 4wd lux/80 series? im using 80 series tie rod ends for more strength. or are they different, & this is what you meant by needing an "end" to suit?

thanks again.