Page 1 of 1

Taking off transfer case

Posted: Sun Oct 30, 2005 6:05 pm
by Glennb
Hi all, Just a question on removing my transfercase from auto trans.
Do I have to take out the auto to remove the transfer case or can it be done by just removing the cross member and unbolting the tranfer case while the trans is still on the car.
Also can any body give me a rough idea about how many hours labor I would be looking at if I got a mechanic to do the change over of the transfer case??
Cheers
Glenn

Posted: Mon Oct 31, 2005 8:13 am
by Bitsamissin
For a mechanic to do it $300-350.
You can remove the t/case from the auto with it still in the car but it's very fiddly, best with a few mates to help.
We did a 5sp that had a 2" body lift (makes it a lot easier) without it I'm sure the gearbox & t/case would have had to come out together.

Posted: Mon Oct 31, 2005 6:19 pm
by Glennb
Thanks frank. back to the mechanic I go :cool:

Posted: Wed Nov 02, 2005 9:06 pm
by Glennb
can sombody confirm if a LWB auto transfercase will fit a SWB auto. I think it does just need some confirmation.
Cheers
Glenn

Posted: Wed Nov 02, 2005 9:27 pm
by Miyagi
i think it will, in my gregorys book it has never refered to drive train parts as wheel base specific

Posted: Tue Nov 08, 2005 2:35 am
by Glennb
cheers