Page 1 of 1
Putting electronic injection onto 2LT engine.
Posted: Wed Nov 02, 2005 12:04 am
by gotoy
Is it possible to put an electronic injection system onto a 2LT? Or, is it possible to take the electronic injection from a 2LT-E engine and put it onto the 2LT?
Posted: Wed Nov 02, 2005 6:57 am
by dumbdunce
yes i t's possible, but it would be a real mission, and there is no benefit besides possibly better emissions. the 2L-T full mechanical pummp is very tuneable and with some tweaks to pump and turbo you can make more power more easily that you ever could with the electronic pump
Posted: Wed Nov 02, 2005 2:38 pm
by MKarmyshev
What for do you want it?
I am thinking of getting rid of all that EFI stuff.
Posted: Wed Nov 02, 2005 6:40 pm
by NiftyNev
Not possible without a Crank Angle Sensor and Coolant Temp Sensor. These can be put in but the Crank Sensor will be useless without the right crankshaft. Not worth the effort.
Neville
Posted: Fri Nov 04, 2005 5:43 pm
by Julian_4x4
Dumbdunce, Question??
Will it be possible to squeeze more power out of my corolla diesel engine/non turbo? Everythings mechanical
Cheers
Posted: Sat Nov 05, 2005 3:41 pm
by +dj_hansen+
Full engine rebuild... short of that a fuel pump rebuild/calibration and new injectors...
Posted: Sun Nov 06, 2005 9:31 am
by dumbdunce
Julian_4x4 wrote:Dumbdunce, Question??
Will it be possible to squeeze more power out of my corolla diesel engine/non turbo? Everythings mechanical
Cheers
yeah, jam a turbo on it.
what sort of motor is it? freer flowing exhaust, fuel pump calibration and injector overhaul will give it the best power it can make without forced induction. most small diesels are easy to adapt a turbo to, as long as there is space in the engine bay.