Page 1 of 1
Genie extractors on ebay
Posted: Wed Nov 02, 2005 7:03 am
by grumpy221
Posted: Wed Nov 02, 2005 7:12 am
by Micka
Shouldn't you be out fixing the hole in the bottom of your sump, Grumpy...rather than posting up at 7 in the morning?
I reckon you should start selling that towel spacer/damper/oil seal as a genuine aftermarket product to Mitsy owners....might just take off.
When are we gonna see you back down at Ormeau?
Micka
Posted: Wed Nov 02, 2005 8:25 am
by Hekta
1996 to 2000 model 3.0 Ltr
How does that differ from a '92 3 Ltr
headers
Posted: Wed Nov 02, 2005 9:08 am
by klrevo
i asked about headers a while ago and was told that the way in which the engine sits in the bay and the path that the headers run differs between models, that was between the 3L v6 in the NG'ish models to the NH'ish models, so i dunno perhaps the same???
dean
Posted: Wed Nov 02, 2005 9:10 am
by Hekta
With a body lift, I wonder if it makes any difference since there's heaps more room around the exhaust ??
Posted: Wed Nov 02, 2005 9:12 pm
by its fishi
Hekta wrote:1996 to 2000 model 3.0 Ltr
How does that differ from a '92 3 Ltr
Genie list a round port for the NH, and oval port for the ones on ebay.
Must be it.
Posted: Wed Nov 02, 2005 9:57 pm
by Hekta
crap
... thanks fishi
Posted: Wed Nov 02, 2005 10:29 pm
by grumpy221
Micka wrote:Shouldn't you be out fixing the hole in the bottom of your sump, Grumpy...rather than posting up at 7 in the morning?
I reckon you should start selling that towel spacer/damper/oil seal as a genuine aftermarket product to Mitsy owners....might just take off.
When are we gonna see you back down at Ormeau?
Micka
Sumps all fixed
so r engine mounts ....just have to put the "spare parts" back on and get another muddie and I'll be ready to go
again ........but next trip will be north ......and neather mind me what were u doing up after the sun's come up
and yer should put the "repair towel" into production make a small fortune