Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series gearbox to 7*series transfer

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

80 series gearbox to 7*series transfer

Post by Bundy_Harry »

Howdy all,

I would like to know if iti si possible to mate an H150F 80 series 5 speed gear box to a 7* series split transfer case?

any information or links would be very much appreciated

cheers
harry
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

No, they have very different bolt and mounting patterns. Why not run an HF1A transfer that comes with the H150f?

Dave
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

beanz2 wrote:No, they have very different bolt and mounting patterns. Why not run an HF1A transfer that comes with the H150f?

Dave
Gday Dave
I second that...with 2.45 low range std in this transfer, and the fact that the fzj75 (4.5 twincam) comes with a h150/hf1a....it cant be that hard.
Andrew
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Cant be done its like trin to bolt a holden motor to a VW gearbox it just wont work.

Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest