Page 1 of 1
bent stering arm????
Posted: Fri Nov 04, 2005 7:58 am
by kegz
hey ive noticed on my old ln65 lux that the shaft that goes from the pitman arm on the steering box to the steering arm or whatever you want to call i hits the u bolts on the prings (LEAF ALL ROUND) would this indicate the arm thats attached to the hub is bent? i have checked al lthings like the diff is lined up properly and the shackels are standard and help would be appreciated cheers
Posted: Fri Nov 04, 2005 8:52 am
by Busiboy
Does it have a 2" lift?
Back in the day when I had a lux I had something similar when I put a 2" lift into my YN65(?) lux
re
Posted: Fri Nov 04, 2005 10:48 am
by kegz
NOT TO SURE ON THE LIFT ITS GOT A LIFT KIT I THINK NOT BODY LIFT THOUGH IS THERE ANYWAY I CAN FIX THIS PROBLEM
Re: re
Posted: Sat Nov 05, 2005 11:17 am
by Gribble
Make sure the "u"bolts are the right way around.
But yes it does sond like the j-arm is bent, especially if you have no lift.