Outer Limits 4x4 Board

Thanks to AnthonyP for posting these for me

Email sent thanks alot for that

looking sweet d00d.

sweet rig... what motor is that?

That my friend is 5ltrs of fords finest Windsor EFI smallblock as from local f100's and eb-au falcons.

is it an injected Ford motor? what gearbox are you running?

camo

typed same time! Love the conversion

ahh cool

intrested to find out what gearbox t/case it's runnning

5L from EB falcon C10 auto G60 Datsun Transfer had twin turbo's for a short while, all about to be junked for 351cu in - 5.8L Windsor another C10 and LT95.

Love it mate nice work! Keep the pics coming as you get it done that would be ace!

A Dats%n what ! Yeah those G60 t/cases are bullet proof, they run huge bearings in them.

Yea transfer whines as loud as simexs but am on the second as the other was missing some teeth never stopped it though. But not enough reduction hence the LT95

Im interested in doning a ute conversion just like yours, did u do it yourself? is it possible for me to have a little look at it if so could u send me a PM, just wondering if that roof on it is still the original just cut and rewelded ? or is it off somthing else?

Do you have the c10 and lt95 yet? Len at Rangie Wreckers (somerville) has a c6/lt95 combo sitting there!

Are you sure it's a C6 as they are the larger auto ran behind ford big blocks if so i'd be keen otherwise it would be either C4 C9 or C10 which are all basically the same transmission.But yes i have 2 Lt95 machined to suit C4 9 10. The roof is just cut and shut.

Nice work cloughy... It dosent look as difficult as i first thought. Could you post some more pics close ups of joins would be great.. what type rear window are you going to use? Is it 1.6mm plate and 25mmSHS for the braces.

nice lookin machine! i am almost at the same stage on my ute conversion. i was goona buy an ol tray off a cruiser and cut it to fit. can you weld a tray to the chassis like that? will it pass engineering? haha go the ford engines. i just dropped a nicely work 302 windsor with a c4 auto into mine. i used the original rear window from my rangie so i can have the thing open up still. what window are you going to use for yours? and how will yuou mount it?


again verrrrrrrrrryyy nice.

The rear window is outlined from an inter truck but will be cut from perspex and yea 1.6mm probably could of used thinner though. The uprights for the tray will be flanged at the top so it can be lifted off. and whats this about engineerwhozewhatsit. Just got to work out how to cap the ends of the quarter panels then its over to my old man to paint

Anyone mind posting some more pics for me if i e-mail them?

If you have the pics on your pc, you can just attach tp you post - no need for hosting.

cloughy wrote:Anyone mind posting some more pics for me if i e-mail them?

Ill host em up for you again d00d... you have a PM.

Cool tray back.

i'm in the UK and i'm about to do a tray myself.I've got a 4 door RRC with the 3.9V8 4 speed auto.

Bobtails are all the rage here but after searching for some ideas i think the tray back is the one for me.More info please/pictures aswell.

Any links to tray back sites? Keep um coming!

Pics

Short roof

Did you weld the roof or rivet and fill ?

Loanrangie wrote:Did you weld the roof or rivet and fill ?

Welded the edges then riveted a 150mm strip of the old roof in the inside using sikaflex, then some fibreglass and filler, probably be prone to cracking but should last a while

That is exactly how i did my roof

Slowly getting there, should be painted within the next fortnight.

Rebuilt LT95 and C10, Auto has an extra clutch pack, re-machined planetry gearset, Stage 2 shift and standard stall of about 1800rpm.

Which should suit the motor quite well, being a 351 windsor, between 9.5 and 10:1 comp balanced(yet to machine the block), blueprinted and ported heads with microtech injection, hopefully should poke along OK